По заказу станок может оснащаться электроприводами и электроаппаратурой, как отечественного производства, так и производства зарубежных фирм Siemens, Mitsubishi, Fagor, Heidenhain.

   The grinders can be used both for rolls regrinding at plants of metallurgy and other branches of industry where rolls are used and for manufacturing new rolls. These machine-tools can be used as heavy-duty cylindrical grinders for machining large-size parts at head machine building plants as well.

   The grinders can be employed for the following operations:

• traverse grinding with automatic in-feed (at wheel-head carriage reversing) of cylindrical, concave, and convex working surfaces of roll barrels, cylindrical and taper journals;
• traverse rough grinding of roll working surface with continuous in-feed for wheel wear compensation;
• - traverse and plunge grinding under manual control including plunge grinding of fillets.

   The roll to be machined is installed either onto the workhead and tailstock centers or on steady-rests with centers support. To enlarge the range of ground diameters the workhead and tailstock of models XШ5-15M and XШ5-25M have two fixed positions against the wheel: front and rear ones.

   When grinding convex or concave surfaces the wheelhead base-plate and the wheelhead itself obtain additional transverse tilting motion around the axle parallel to the wheel spindle axis from a cambering mechanism mounted onto the wheelhead carriage and adjusted to the required convexity or concavity.

   Grinding of journals taper surfaces can be performed as well thanks to fhe use of a tempfafe by combining two motions traverse movement of the wheel carriage and transverse movement of the wheelhead toward the tailstock only.

   The grinding wheel for taper surface is also trued and dressed to required taper angle using the same template.

* Для переднего положения оси центров
** Для заднего положения центров